Categories
x
Filters
Charging
Portable charger for electric vehicles CCE 16A 3-Phases (3P N E) / Type 2 IEC 62196
Main features:
ALL-IN-A PLUG design – NO bulky box on the cable
100% in-house developed miniature FULL feature vehicle communication module (Micro EVSE 2)
Designed for 3-phase and 1-phase Mode 2 EV charging with currents up to 3x16A
ADJUSTABLE CHARGING CURRENT (from 6A to 16A)
Charging current can be changed even during charging process
Integrated self re-settable over-temperature protection with SOFT-OFF capability
PREMIUM quality EV cable used (Made in Germany)
Variable plug type (wall socket/grid side)
Variable cable lengths from 5m to 12m
RAINPROOF

Cable properties * :
Resistant to microbes, oil, dust and water
Special cable design for long service life
Flexible at low temperatures (fully flexible temp. range: -25°C to 80°C)
Withstands high mechanical stress, in particular abrasion and sliding demands

[*] Applies to the insulated cable part only, not the electronics

Technical Specifications:
Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
Plug Type (wall socket/grid side): customer defined (CEE 16A (3-phase/3P N E), CEE 32A (3-phase/3P N E),….)
Max. Charging Current: 3x16A (3-phase) or 1x16A (single phase)
Charging current can be adjusted: 6A, 8A, 10A, 13A or 16A
Selected charging current stays stored in internal memory even when disconnected from the socket (power)
Max. Charging Power (single/three phase): 3,7 kW/11 kW
Rated Voltage (single/three phase): 230/400V
Operating voltage range (single/three phase): from 90V/155V to 270V/470V (50/60Hz)
Idle energy consumption: 7 Watt (EVSE and RCD)
Micro EVSE 1 inside EV plug – in-house developed FULL feature vehicle communication module
Ultra accurate and temperature independent QUARTZ controlled EV communication frequency
User info via Blue LED light
Detects/indicates ALL normal charging states (via Blue LED)
Detects/indicates ALL faults (via Blue LED)
Auto recovers from any possible fault !
Cable Length: customer defined
UV, oil and flame resistant cable insulation
Operating Ambient Air Temperature Range: -30 °C to 40 °C (at full sun exposure)
Integrated self re-settable over-temperature protection with SOFT-OFF capability
IP Rating: IP54 (rain water resistant)
Cable Color: Orange
Weight: depends on cable length
IEC 61851 compliant
CE approved
Warranty: 2 years
520,30 € 520,30 € 520.3 EUR Add to Cart
Charging cable for electric vehicles with button to open Tesla charge port Type 2 to Type 2 (20A, 3-Phases)
Main features:
Designed for 3-phase EV charging with currents up to 3 x 20A (13.8 kW)
Integrated Tesla remote charging port opener and plug unlocker
PREMIUM quality EV cable used (Made in Germany)
Variable cable lengths from 3m to 30m (contact us for lengths above 20 m, due to a need for customized proforma invoice)
3 YEARS WARRANTY

Technical Specifications:
Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
Plug Type (Charging Station Side): Type 2 (IEC 62196) Male Plug
Max. Charging Current: 3 x 20A (3-phase)
Max. Charging Power: 13.8 kW (3-phase)
Rated Voltage: 400V (3-phase)
Integrated battery powered Tesla remote charging port opener and plug unlocker (estimated battery life: 5 years; can be replaced)
Cable Length: customer defined
UV, oil and flame resistant cable insulation
Operating Ambient Air Temperature Range: -30 °C to +50 °C
IP Rating: IP44
Cable Color: Black or Orange
Weight: depends on cable length
Specially developed for charging European versions of Tesla electric vehicles that have Type 2 charging sockets and 3-phase onboard chargers (Model 3, Model S, Model X)
Also compatible with all EVs that have Type 2 charging sockets and 1-phase or 3-phase on-board chargers but in any case the charging power won’t be higher than 4.6 kW (20A/1-phase) or 13.8 kW (20A/3-phase).
It contains a CR2032 3V battery that should be replaced every 2-4 years. Battery is not covered by warranty!
272,25 € 272,25 € 272.25 EUR Add to Cart
Charging cable for electric vehicles Type 2 to Type 2 (16A, 3-Phases)
Main features:

Designed for 3-phase EV charging with currents up to 3 x 20A (13.8 kW)
PREMIUM quality EV cable used (Made in Germany)
Variable cable lengths from 3m to 30m (contact us for lengths above 20 m, due to a need for customized proforma invoice)
3 YEARS WARRANTY

Technical Specifications:

Plug Type (EV Side): Type 2 (IEC 62196) Female Plug
Plug Type (Charging Station Side): Type 2 (IEC 62196) Male Plug
Max. Charging Current: 3x20A (3-phase) or 1x20A (1-phase)
Max. Charging Power: 13.8 kW (3-phase) or 4.6 kW (1-phase)
Rated Voltage: 400V (3-phase)
Cable Length: customer defined
UV, oil and flame resistant cable insulation
Operating Ambient Air Temperature Range: -30 °C to +50 °C
IP Rating: IP44
Cable Color: Orange or black
Weight: depends on cable length
100% compatible with all electric vehicles that have European Type 2 charging sockets

Green production

All our products are produced in a carbon neutral way by using “Sustainable energy cycle” method. Production plant where we make charging cables and portable charging stations is the first fully sustainable production facility for EV charging cables. All energy, needed for the heating and cooling of the building, production process and for transportation of goods and employees (except deliveries of heavy materials by trucks), is produced by 2 photovoltaic power plants and stored in 4 storage batteries. Almost all of the raw materials we use (cables, plugs) are produced in EU, to shorten supply routes and support local economy. Buying our products helps developing sustainable economy.
181,50 € 181,50 € 181.5 EUR Add to Cart